Suspension - FourSport Off-Road
Famous Four offer a range of Suspension for Land Rover and Range Rover vehicles.
- Snorkels
- Wading Kits and Accessories
- Winches
- Winch Bumpers and Mounts
- Shackles and Recovery Points
- Hi-Lift Jacks & Accessories
- Recovery Equipment
- Recovery Ropes and Strops
- Fuel Cans and Accessories
- Accessory Lamps
- Differential Guards
- Under-Body Guards
- Reinforced 'Rock Slider' Sills
- Suspension
- Chequerplate Body Protection
- Winching Accessories
- High Performance Batteries
- Harnesses
- Off-Road Wheels
- Off-Road Accessories
- Other Parts
90/110 and Defender
FF008354 |
50mm Lowered Top Shock Absorber Mounts
90 - Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
|
PAIR
£47.50 +VAT
|
Qty:
|
Qty:
|
FF005935 |
Front Axle Bump Stop
Extended
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF001000 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - 90 & 110
|
PAIR
£82.50 +VAT
|
Qty:
|
Qty:
|
FF001001 |
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - 90 ONLY
|
PAIR
£82.50 +VAT
|
Qty:
|
Qty:
|
FF005934 |
Rear Axle Bump Stop
Extended
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF005840 |
Single Tubular Shock Mount
Front
|
PAIR
£58.50 +VAT
|
Qty:
|
Qty:
|
FF005841 |
Single Tubular Shock Mount
Front LOWERED HEIGHT 50mm
|
PAIR
£81.50 +VAT
|
Qty:
|
Qty:
|
FF003510 |
Spring Dislocation Cones
90 - Rear
|
PAIR
£39.95 +VAT
|
Qty:
|
Qty:
|
FF005820 |
Spring Dislocation Cones
Front
|
PAIR
£41.50 +VAT
|
Qty:
|
Qty:
|
FF006864 |
Spring Retaining Plates
90 - Rear
|
PAIR
£7.95 +VAT
|
Qty:
|
Qty:
|
FF006863 |
Spring Retaining Plates
Front
|
PAIR
£9.50 +VAT
|
Qty:
|
Qty:
|
FF005149 |
Twin Shock Mount Kit
Rear
|
KIT
£66.50 +VAT
|
Qty:
|
Qty:
|
FF006940 |
Twin Shock Mount Kit
Rear - IMPORTANT read SAFETY info by clicking on picture
Heavily laden expedition and fast off road vehicles benefit from fitting twin shocks as it reduces shock stress and inherent heat build up. The Terrafirma Rear twin shock mount kit allows the 2 shocks to run parallel with each other using existing mounting points. They perform brilliantly and also look superb.
IMPORTANT
30mm wheel spacers may be required to prevent the inner edge of the rear wheel or tyre from rubbing on the lower double shock mount. This is predominantly the case with standard Land Rover alloy wheels.
|
KIT
£91.50 +VAT
|
Qty:
|
Qty:
|
Discovery '200' Series (1990-94 Models)
FF008354 |
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
|
PAIR
£47.50 +VAT
|
Qty:
|
Qty:
|
FF005935 |
Front Axle Bump Stop
Extended
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF003493 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - 200 Tdi
|
PAIR
£82.50 +VAT
|
Qty:
|
Qty:
|
FF003495 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
|
PAIR
£80.00 +VAT
|
Qty:
|
Qty:
|
FF003494 |
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and Tdi
|
PAIR
£82.50 +VAT
|
Qty:
|
Qty:
|
FF005934 |
Rear Axle Bump Stop
Extended
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF005820 |
Spring Dislocation Cones
Front
|
PAIR
£41.50 +VAT
|
Qty:
|
Qty:
|
FF003510 |
Spring Dislocation Cones
Rear
|
PAIR
£39.95 +VAT
|
Qty:
|
Qty:
|
FF006863 |
Spring Retaining Plates
Front
|
PAIR
£9.50 +VAT
|
Qty:
|
Qty:
|
FF006864 |
Spring Retaining Plates
Rear
|
PAIR
£7.95 +VAT
|
Qty:
|
Qty:
|
Discovery '300' Series (1995-98 Models)
FF008354 |
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
|
PAIR
£47.50 +VAT
|
Qty:
|
Qty:
|
FF005935 |
Front Axle Bump Stop
Extended - to MA113760
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF003496 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - 300 Tdi
|
PAIR
£92.50 +VAT
|
Qty:
|
Qty:
|
FF003495 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
|
PAIR
£80.00 +VAT
|
Qty:
|
Qty:
|
FF003497 |
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and TDi
|
PAIR
£92.50 +VAT
|
Qty:
|
Qty:
|
FF005934 |
Rear Axle Bump Stop
Extended - to MA113760
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF005820 |
Spring Dislocation Cones
Front
|
PAIR
£41.50 +VAT
|
Qty:
|
Qty:
|
FF003510 |
Spring Dislocation Cones
Rear
|
PAIR
£39.95 +VAT
|
Qty:
|
Qty:
|
FF006863 |
Spring Retaining Plates
Front
|
PAIR
£9.50 +VAT
|
Qty:
|
Qty:
|
FF006864 |
Spring Retaining Plates
Rear
|
PAIR
£7.95 +VAT
|
Qty:
|
Qty:
|
Range Rover Classic 1970-85 Models
FF008354 |
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
|
PAIR
£47.50 +VAT
|
Qty:
|
Qty:
|
FF005935 |
Front Axle Bump Stop
Extended
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF003493 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - Tdi/VM
|
PAIR
£82.50 +VAT
|
Qty:
|
Qty:
|
FF003495 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
|
PAIR
£80.00 +VAT
|
Qty:
|
Qty:
|
FF003498 |
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and TDi
|
PAIR
£80.00 +VAT
|
Qty:
|
Qty:
|
FF005934 |
Rear Axle Bump Stop
Extended
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF005820 |
Spring Dislocation Cones
Front
|
PAIR
£41.50 +VAT
|
Qty:
|
Qty:
|
FF003510 |
Spring Dislocation Cones
Rear
|
PAIR
£39.95 +VAT
|
Qty:
|
Qty:
|
FF006863 |
Spring Retaining Plates
Front
|
PAIR
£9.50 +VAT
|
Qty:
|
Qty:
|
FF006864 |
Spring Retaining Plates
Rear
|
PAIR
£7.95 +VAT
|
Qty:
|
Qty:
|
Range Rover Classic 1986-95 Models
FF008354 |
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
|
PAIR
£47.50 +VAT
|
Qty:
|
Qty:
|
FF005935 |
Front Axle Bump Stop
Extended - Coil Sprung Vehicles ONLY - up to MA656125
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF003493 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - Tdi/VM
|
PAIR
£82.50 +VAT
|
Qty:
|
Qty:
|
FF003495 |
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
|
PAIR
£80.00 +VAT
|
Qty:
|
Qty:
|
FF003498 |
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and TDi
|
PAIR
£80.00 +VAT
|
Qty:
|
Qty:
|
FF005934 |
Rear Axle Bump Stop
Extended - COIL SPRUNG - up to MA656125
|
EACH
£25.50 +VAT
|
Qty:
|
Qty:
|
FF005820 |
Spring Dislocation Cones
Front
|
PAIR
£41.50 +VAT
|
Qty:
|
Qty:
|
FF003510 |
Spring Dislocation Cones
Rear
|
PAIR
£39.95 +VAT
|
Qty:
|
Qty:
|
FF006863 |
Spring Retaining Plates
Front
|
PAIR
£9.50 +VAT
|
Qty:
|
Qty:
|
FF006864 |
Spring Retaining Plates
Rear
|
PAIR
£7.95 +VAT
|
Qty:
|
Qty:
|
All prices quoted in GB POUND STERLING and EXCLUDE VAT & CARRIAGE.
UK VAT is levied at 20.0% and is payable only on goods shipped and carriage to the UK and European Union.
CARRIAGE QUOTES ARE AVAILABLE ON REQUEST, or VIA OUR Web Shop