90/110 and Defender

50mm Lowered Top Shock Absorber Mounts - 90/110 and Defender
tf
50mm Lowered Top Shock Absorber Mounts
90 - Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
More Info...
PAIR
£47.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - 90/110 and Defender
polybush
Bump Stop - Polybush
Front Axle - Red - Extended Length
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - 90/110 and Defender
polybush
Bump Stop - Polybush
Rear Axle - Red - Extended Length
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - 90/110 and Defender
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - 90 & 110
More Info...
PAIR
£82.50 +VAT
Qty:
Qty:
Heavy Duty Rear Coil Springs - 90/110 and Defender
famfour
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - 90 ONLY
More Info...
PAIR
£82.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - 90/110 and Defender
Spring Dislocation Cones
90 - Rear
More Info...
PAIR
£39.95 +VAT
Qty:
Qty:
Spring Dislocation Cones - 90/110 and Defender
Spring Dislocation Cones
Front
More Info...
PAIR
£41.50 +VAT
Qty:
Qty:
Spring Retaining Plates - 90/110 and Defender
tf
Spring Retaining Plates
90 - Rear
More Info...
PAIR
£7.95 +VAT
Qty:
Qty:
Spring Retaining Plates - 90/110 and Defender
tf
Spring Retaining Plates
Front
More Info...
PAIR
£9.50 +VAT
Qty:
Qty:
Tubular Shock Mount - 90/110 and Defender
Tubular Shock Mount
Front
a pair of mounts for singular shocks (not twin shocks)
More Info...
PAIR
£58.50 +VAT
Qty:
Qty:
Tubular Shock Mount - 90/110 and Defender
Tubular Shock Mount
Front LOWERED HEIGHT 50mm
a pair of mounts for singular shocks (not twin shocks)
More Info...
PAIR
£81.50 +VAT
Qty:
Qty:
Twin Shock Mount Kit - 90/110 and Defender
Twin Shock Mount Kit
Rear
some welding required.
More Info...
KIT
£66.50 +VAT
Qty:
Qty:
Twin Shock Mount Kit - 90/110 and Defender
tf
Twin Shock Mount Kit
Rear - IMPORTANT read SAFETY info by clicking on picture
Heavily laden expedition and fast off road vehicles benefit from fitting twin shocks as it reduces shock stress and inherent heat build up. The Terrafirma Rear twin shock mount kit allows the 2 shocks to run parallel with each other using existing mounting points. They perform brilliantly and also look superb. IMPORTANT 30mm wheel spacers may be required to prevent the inner edge of the rear wheel or tyre from rubbing on the lower double shock mount. This is predominantly the case with standard Land Rover alloy wheels.
More Info...
KIT
£91.50 +VAT
Qty:
Qty:

Discovery '200' Series (1990-94 Models)

50mm Lowered Top Shock Absorber Mounts - Discovery '200' Series (1990-94 Models)
tf
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
More Info...
PAIR
£47.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Discovery '200' Series (1990-94 Models)
polybush
Bump Stop - Polybush
Front Axle - Red - Extended Length
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Discovery '200' Series (1990-94 Models)
polybush
Bump Stop - Polybush
Rear Axle - Red - Extended Length
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Discovery '200' Series (1990-94 Models)
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - 200 Tdi
More Info...
PAIR
£82.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Discovery '200' Series (1990-94 Models)
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
More Info...
PAIR
£80.00 +VAT
Qty:
Qty:
Heavy Duty Rear Coil Springs - Discovery '200' Series (1990-94 Models)
famfour
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and Tdi
More Info...
PAIR
£82.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - Discovery '200' Series (1990-94 Models)
Spring Dislocation Cones
Front
More Info...
PAIR
£41.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - Discovery '200' Series (1990-94 Models)
Spring Dislocation Cones
Rear
More Info...
PAIR
£39.95 +VAT
Qty:
Qty:
Spring Retaining Plates - Discovery '200' Series (1990-94 Models)
tf
Spring Retaining Plates
Front
More Info...
PAIR
£9.50 +VAT
Qty:
Qty:
Spring Retaining Plates - Discovery '200' Series (1990-94 Models)
tf
Spring Retaining Plates
Rear
More Info...
PAIR
£7.95 +VAT
Qty:
Qty:

Discovery '300' Series (1995-98 Models)

50mm Lowered Top Shock Absorber Mounts - Discovery '300' Series (1995-98 Models)
tf
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
More Info...
PAIR
£47.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Discovery '300' Series (1995-98 Models)
polybush
Bump Stop - Polybush
Front Axle - Red - Extended Length - to MA113760
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Discovery '300' Series (1995-98 Models)
polybush
Bump Stop - Polybush
Rear Axle - Red - Extended Length - to MA113760
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Discovery '300' Series (1995-98 Models)
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - 300 Tdi
More Info...
PAIR
£92.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Discovery '300' Series (1995-98 Models)
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
More Info...
PAIR
£80.00 +VAT
Qty:
Qty:
Heavy Duty Rear Coil Springs - Discovery '300' Series (1995-98 Models)
famfour
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and TDi
More Info...
PAIR
£92.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - Discovery '300' Series (1995-98 Models)
Spring Dislocation Cones
Front
More Info...
PAIR
£41.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - Discovery '300' Series (1995-98 Models)
Spring Dislocation Cones
Rear
More Info...
PAIR
£39.95 +VAT
Qty:
Qty:
Spring Retaining Plates - Discovery '300' Series (1995-98 Models)
tf
Spring Retaining Plates
Front
More Info...
PAIR
£9.50 +VAT
Qty:
Qty:
Spring Retaining Plates - Discovery '300' Series (1995-98 Models)
tf
Spring Retaining Plates
Rear
More Info...
PAIR
£7.95 +VAT
Qty:
Qty:

Range Rover Classic 1970-85 Models

50mm Lowered Top Shock Absorber Mounts - Range Rover Classic 1970-85 Models
tf
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
More Info...
PAIR
£47.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Range Rover Classic 1970-85 Models
polybush
Bump Stop - Polybush
Front Axle - Red - Extended Length
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Range Rover Classic 1970-85 Models
polybush
Bump Stop - Polybush
Rear Axle - Red - Extended Length
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Range Rover Classic 1970-85 Models
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - Tdi/VM
More Info...
PAIR
£82.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Range Rover Classic 1970-85 Models
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
More Info...
PAIR
£80.00 +VAT
Qty:
Qty:
Heavy Duty Rear Coil Springs - Range Rover Classic 1970-85 Models
famfour
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and TDi
More Info...
PAIR
£80.00 +VAT
Qty:
Qty:
Spring Dislocation Cones - Range Rover Classic 1970-85 Models
Spring Dislocation Cones
Front
More Info...
PAIR
£41.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - Range Rover Classic 1970-85 Models
Spring Dislocation Cones
Rear
More Info...
PAIR
£39.95 +VAT
Qty:
Qty:
Spring Retaining Plates - Range Rover Classic 1970-85 Models
tf
Spring Retaining Plates
Front
More Info...
PAIR
£9.50 +VAT
Qty:
Qty:
Spring Retaining Plates - Range Rover Classic 1970-85 Models
tf
Spring Retaining Plates
Rear
More Info...
PAIR
£7.95 +VAT
Qty:
Qty:

Range Rover Classic 1986-95 Models

50mm Lowered Top Shock Absorber Mounts - Range Rover Classic 1986-95 Models
tf
50mm Lowered Top Shock Absorber Mounts
Rear
It is possible to gain an additional 2 inches (50mm) of rear suspension drop-out by fitting lowered rear top shock absorber mounts. By mounting the shock absorbers lower on the chassis allows for greater axle articulation. Lowering your shock absorbers can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops FF005934 or FF005935
More Info...
PAIR
£47.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Range Rover Classic 1986-95 Models
polybush
Bump Stop - Polybush
Front Axle - Red - Extended Length - Coil Sprung Vehicles ONLY - up to MA656125
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Bump Stop - Polybush - Range Rover Classic 1986-95 Models
polybush
Bump Stop - Polybush
Rear Axle - Red - Extended Length - COIL SPRUNG - up to MA656125
More Info...
EACH
£25.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Range Rover Classic 1986-95 Models
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - Tdi/VM
More Info...
PAIR
£82.50 +VAT
Qty:
Qty:
Heavy Duty Front Coil Springs - Range Rover Classic 1986-95 Models
famfour
Heavy Duty Front Coil Springs
Plus 1 inch Ride Height - V8 Petrol
More Info...
PAIR
£80.00 +VAT
Qty:
Qty:
Heavy Duty Rear Coil Springs - Range Rover Classic 1986-95 Models
famfour
Heavy Duty Rear Coil Springs
Plus 1 inch Ride Height - V8 and TDi
More Info...
PAIR
£80.00 +VAT
Qty:
Qty:
Spring Dislocation Cones - Range Rover Classic 1986-95 Models
Spring Dislocation Cones
Front
More Info...
PAIR
£41.50 +VAT
Qty:
Qty:
Spring Dislocation Cones - Range Rover Classic 1986-95 Models
Spring Dislocation Cones
Rear
More Info...
PAIR
£39.95 +VAT
Qty:
Qty:
Spring Retaining Plates - Range Rover Classic 1986-95 Models
tf
Spring Retaining Plates
Front
More Info...
PAIR
£9.50 +VAT
Qty:
Qty:
Spring Retaining Plates - Range Rover Classic 1986-95 Models
tf
Spring Retaining Plates
Rear
More Info...
PAIR
£7.95 +VAT
Qty:
Qty:

All prices quoted in GB POUND STERLING and EXCLUDE VAT & CARRIAGE.

UK VAT is levied at 20.0% and is payable only on goods shipped and carriage to the UK and European Union.

CARRIAGE QUOTES ARE AVAILABLE ON REQUEST, or VIA OUR Web Shop