Winches, Accessories and Winch Bumpers

TABOR 9K SELF-RECOVERY WINCH

Low cost and legendary WARN quality, the Tabor 9K is a great option for anyone looking for a reliable occasional use recovery system.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

TABOR 12K SELF-RECOVERY WINCH

Low cost and legendary WARN quality, the Tabor 12K is a great option for anyone looking for a reliable occasional use recovery system on a heavier vehicle.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

XD9000i SELF-RECOVERY WINCH

You will probably see more XD9000i winches on off-road vehicles than any other winch. No load line speed of 38-feet per minute and three-stage planetary gearing, combined with the ability to run cool with low amp draw for long winching cycles are just a few reasons why.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

9.5xp SELF-RECOVERY WINCH

9.5xp is designed for the serious off-roader who demands a winch that will perform under the most extreme conditions. The 9.5xp winch features a High Output Parallel Series Wound winch motor thats the strongest and most durable in the industry. The 6 hp motor, 3-stage planetary gearing and continuous duty control pack work in sync to tackle the most demanding operations. Full face contact drum seals, motor and end housing gaskets deliver great water resistance.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

9.5ti THERMOMETRIC SELF-RECOVERY WINCH

The new 9.5ti packs 9500 lbs of pulling capacity into a 12.5 lb aluminum die-cast body. The new shape not only looks great, but keeps out the elements better than any other winch on the market. Seals at the key points also give all-important water resistance. The winchs thermometric indicator gives the operator information about motor temperature during the winching operation, ensuring the both safety and peace of mind.

M8274-50 SELF-RECOVERY WINCH

Loved by off-roaders who compete, the WARN M8274-50 is one of WARNs fastest winches. No load retrieval speed is 73.4 feet per minute. At 150 feet of 5/16" cable, it also has a very long line capacity. Its unique spur-gear drive train and upright design are totally rugged and its braking system delivers smooth operation with superior heat dissipation. Roller fairlead, remote control on 12-ft. lead, free spool clutch and battery cables are included.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

XD9000 SELF-RECOVERY WINCH

The XD9000 is built to the same exacting standards and specifications as the XD9000i, one of WARNs most popular winches, but the separate solenoid pack gives this version more flexibility for mounting to the vehicle. No load line speed of 38-feet per minute and three-stage planetary gearing, combined with the ability to run cool with low amp draw for long winching cycles. Supplied with a Roller Fairlead.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

Anderson Connectors

Highly durable snap-fit battery connectors, ideal for demountable winches or winches that are removed from the vehicle when not in use. Covers also available to protect the open end of the connector from the elements.

Please Note: 2 different Anderson connectors exist, one type is red and the other type is grey. The two are NOT inter-connectable. We can supply both types - if you are purchasing one to connect to an existing connector please ensure you know which you need. Covers fit either type.

Aluminium Hawse Fairlead

Specially designed for use with Plasma or Dyneema ropes, this fairlead eliminates snags and abrasions that occur from repeated use of rope with conventional roller type fairleads. The Hawse fairlead is ultra lightweight, and fits 9" drums used on many Warn, Superwinch, Ramsey and Husky winches.

PLEASE NOTE: This Fairlead is NOT suitable for use with Steel Winch Cables.

Warn Wireless Remote Control

The WARN Wireless Control System lets you operate your winch remotely from up to 14 metres away. The system will work with any WARN winch with a 5-pin electrical socket.

The system is easy to install and use. The Wireless Control System comes with a receiver with an internal antenna, and all of the necessary mounting hardware. The receiver is potted for extreme resistance to water and the elements. The weather-proof transmitter has two large buttons that make it easy to operate, even while wearing gloves, and its two-colour LED provides operator feedback.

M8000 SELF-RECOVERY WINCH

An outstanding value for lighter trucks. The M8000, with its 4.8-hp Series Wound motor and 3-stage planetary geartrain, packs 8,000 lbs. of pulling power to get the job done. Pulls a fast 8 ft. per minute at rated load.

PLEASE BE ASSURED THAT ALL OUR WARN WINCHES ARE PURCHASED THROUGH AN AUTHORISED UK RESELLER

Winch Bumper - Land Rover 90/110 and Defender

• UK Manufactured
• 5mm steel plate construction
• Black Powder Coated or Hot-Dip Galvanised finishes
• Fits all WARN Winches (except 8274/50) and Superwinch X9
• Built-in off-road recovery points
• Hi-Lift jacking points built-in
• Tapered ends give greater approach angle
• Includes high-tensile steel fixing bolts and bolt covers
• Air-conditioned version does not accomodate winches with integral solonoid bridge above reel (e.g. X9, XD9000i, 9.5ti etc.). A winch with a separate solonoid pack (e.g. 9.5xp, M8000 etc.) must be used with Air-conditioned vehicles.

Winch Bumper - Discovery 200 Tdi and V8 Carb/EFi (1989-1994 Models)

• UK Manufactured
• 5mm steel plate construction
• Black Powder Coated or Hot-Dip Galvanised finishes
• Fits XD9000i and M8000 WARN Winches and Superwinch X9 or EP9.0
• Built-in off-road recovery points
• Hi-Lift jacking points built-in
• Tapered ends give greater approach angle
• Includes high-tensile steel fixing bolts and bolt covers

Winch Bumper - Discovery 300 Tdi and V8 3.9 EFi (1995-1998 Models)

• UK Manufactured
• 5mm steel plate construction
• Black Powder Coated or Hot-Dip Galvanised finishes
• Fits XD9000i and M8000 WARN Winches and Superwinch X9 or EP9.0
• Built-in off-road recovery points
• Hi-Lift jacking points built-in
• Tapered ends give greater approach angle
• Includes high-tensile steel fixing bolts and bolt covers

Winch Bumper - Range Rover Classic

• UK Manufactured
• 5mm steel plate construction
• Black Powder Coated or Hot-Dip Galvanised finishes
• Fits XD9000i and M8000 WARN Winches and Superwinch X9 or EP9.0
• Built-in off-road recovery points
• Hi-Lift jacking points built-in
• Tapered ends give greater approach angle
• Includes high-tensile steel fixing bolts and bolt covers

Winch Mounting Kit - Range Rover L322

• Genuine Land Rover Kit
• Black Powder Coated
• Comes with complete WARN 9.5ti winch
• Fits in front of existing bumper (some cutting may be required)
• Tested and Approved for use with Land Rover SRS Airbag System
• Includes full fitting kit and instructions
• Used on Range Rover L322 in the 2003 and 2007 G4 Challenge

Winch Mounting Kit - Discovery II PRE-FACELIFT Model (1999-2002 Model Year)

• Black Powder Coated
• Fits in front of existing bumper (some cutting may be required)

Winch Mounting Kit - Discovery II FACELIFT Model (2003-2004 Model Year or later)

• Genuine Land Rover Kit
• Black Powder Coated
• Comes with complete WARN XD9000i winch
• Fits in front of existing bumper (some cutting may be required)
• Tested and Approved for use with Land Rover SRS Airbag System
• Includes full fitting kit and instructions
• Used on Discovery II in the 2003 G4 Challenge