| |
|
Off-Road Accessories
|
4X Flood Lamps
WARN 4X Flood Lamps offer excellent close-in illumination - up to 200 percent greater area than the standard vehicle headlamps - ideal for off-road driving.
These lamps are sold as a kit comprising of:
- 2x Polished Stainless Steel Housed 4X Flood Lamps
- 2x Plastic "WARN" logo'd covers
- Swivel Adjustable Mounts
- Full wiring and dashboard switch
- 55W H3 Quartz Halogen Bulbs
|
|
4X Spot Lamps
WARN 4X Spot Lamps project an intense pencil-beam for long-range vision in off-road conditions.
These lamps are sold as a kit comprising of:
- 2x Polished Stainless Steel Housed 4X Spot Lamps
- 2x Plastic "WARN" logo'd covers
- Swivel Adjustable Mounts
- Full wiring and dashboard switch
- 100 W H3 Quartz Halogen Bulbs
|
|
7" Dual Beam Spot/Driving Lamp
AS USED ON LAND ROVER G4 CHALLENGE VEHICLES
The 7" Dual Beam Spot/Driving Lamps use a precision design Free Curve reflector that is outstandingly smooth and heat resistant. They reflect light efficiently, due to the vaporized aluminium applied to the reflector surface.
Off-road drivers will appreciate a lamp with a spot beam range of up to 270 metres and a driving beam wide enough to illuminate the immediate area around the front of the vehicle.
These lights have an internal light frame to protect against vibration and shock and a stone guard to protect the lens. The body is constructed of a polycarbonate resin, which has excellent impact resistance. They also features a weather resistant rubber seal to help protect the lamp integrity. The hardened glass lens gives excellent heat and thermal shock resistance, strength and translucency.
The kit includes a pair of lamps, wiring kit (including relays and control switch) and fittings. The lamp illumination angle can be adjusted to 15 degrees up or down to fine-tune the light pattern. A Dual Beam control switch includes relay control feature and LED illumination when lamps are in use.
|
|
5.25" Dual Beam Spot/Driving Lamp
AS USED ON LAND ROVER G4 CHALLENGE VEHICLES
The 5.25" Dual Beam Spot/Driving Lamps use a free curve reflector. A Free Curve reflector is very efficient because it uses the whole reflector. This allows a spot beam range of up to 235 metres and a driving beam wide enough to illuminate the immediate area around the front of the vehicle.
These lights have an internal light frame to protect the lamp from vibration and shock when running off-road, plus an impact resistant polycarbonate body protects the exterior. Heat and weather resistant EPT material helps protect lamp integrity.
The lens is protected by a stone guard in a "V"-shape to let air cool the lens surface, allowing extended operation of the lamp. Hardened glass lens has excellent heat and thermal shock resistance, strength and translucency.
The kit includes a pair of lamps, wiring kit (including relays and control switch) and fittings. Easily adjustable illumination angle to 15° up or down and Dual Beam control switch includes relay control feature and LED illumination when lamps are in use.
|
|
Work Lamp
Specially designed for use as a work area flood lamp. Provides a bright light and offers adjustable positioning and an independant switch to allow the lamp to be turned on and off while in the work area. NO BULB INCLUDED (available at extra cost).
|
Chequerplate Body Protection
 Rear Corner Protectors
|
 Sill Protectors
|
 Bumper Treadplate
|
 Wing Top Protectors
|
Famous Four FourSport offer a range of chequerplate body protection panels for Series IIA/III and 90/110 and Defender Land Rovers. All panels require drilling and fixing, rivets are not supplied. Series IIA/III items are not suitable for ex-Military vehicles.
|
Heavy Duty Jump-Start Leads
- Fully insulated Heavy Duty clamps
- Suitable for use on a large range of vehicles including, cars, 4x4s, vans, large commercials and agricultural vehicles.
- Supplied in a protective Nylon bag for stowage in smaller spaces.
| Conductor cable diameter |
50mm |
| Cable Length |
5.0m (15ft) |
| Continous Usage Rated |
600Amps |
|
|
Rigger's Gloves
Essential protection for your hands when working with winch cables and ropes off-road, a pair of rigger's gloves is a vital part of any off-road kit.
|
|
Pitch and Roll Inclinometer
This innovative dual guage inclinometer mounts to the dashboard of the car and shows the angle of the car's pitch (front/rear tilt) and roll (left/right tilt) on an easy to read dial.
Fitting is via an adjustable mouting that can be fixed by the self-adhesive strip (supplied) or screws/bolts (not supplied)
The meter can also be wired into the vehicles dashboard lighting (instructions provided with kit) to light up when the headlights are on to aid reading in dark conditions.
|
|
FIA Approved Battery Cut-off Switch
An essential safety item for any off-road vehicle. Allows the battery supply to the entire car to be disabled quickly and easily.
Kit includes switch, plastic key and wiring instructions.
|
|
Wing-Top Air In-takes for 90/110 and Defenders
Increase the airflow to your heater! These intakes replace the wing-top grille and improves the airflow into the heater unit dramatically, giving improved heater performance.
|
|
| |
|
0 ITEMS
|
|
|
Parts:
|
£0.00
|
| |
| |