SERIES I 1989-98 SERIES II 1999-2004 90/110 & DEFENDER SERIES II/IIA & III FREELANDER 1998-2003 CLASSIC RANGE ROVER P38A 1995-2002

Classic Range Rover
Handling Components

HEAVY DUTY COIL SPRINGS

V8 PETROL

Standard Ride Height FRONT £58.00 pair REAR £58.00 pair +1" Ride Height FRONT £64.00 pair REAR £64.00 pair MINUS 1" Ride Height (lowered) FRONT £64.00 pair REAR £64.00 pair

Original fitment VM or Tdi DIESEL

Standard Ride Height FRONT £68.22 pair REAR £58.00 pair +1" Ride Height FRONT pair £74.22 pair REAR pair £64.00 pair MINUS 1" Ride Height (lowered) FRONT £74.22 pair REAR £64.00 pair

REAR SPRING DISLOCATION CONES Lessen the chances of losing a spring during awkward cross-axle situations. Part No.: FF003510 £42.50 +VAT a pair

SUSPENSION BUSHES

- Rubber Suspension Bushes -

Rubber chassis bush kit (all 4 radius arms and panhard rod)
£45.00

Rubber Rear 'A' Frame bushes
£8.00 a pair

Shock Absorber bush kit rubber
from £5.60

Polyurethane Suspension Bush Kits

Last longer, reduce body roll, easy fitting two-piece design. Available either as either long established RED 'CLASSIC' type or new softer BLUE 'COMFORT' range.

CLICK ON THE ABOVE IMAGE FOR MORE DETAILS

Standard 'Polybush' RED or BLUE chassis bush kit (all 4 radius arms and panhard rod)
£80.00
(Pre 1986 models)

This kit does not include the triangular plates fitted in the centre of the Rear Radius Arm to Chassis bushes. These can be recovered from the original bushes, or can be purchased as a separate item for an additional £12.00 a pair.

Standard 'Polybush' RED or BLUE chassis bush kit (all 4 radius arms and panhard rod)
£89.36
(1986 models onwards = VIN 'CA' onwards)

This kit does include the triangular plates and round end plates fitted to the Rear Radius Arm to Chassis bushes on 1986 onwards ('CA' VIN/Chassis number) Models.

CLICK ON THE ABOVE IMAGE FOR MORE DETAILS

Nut & Bolt kit to suit Standard bush change
£18.00

CLICK ON THE ABOVE IMAGE FOR MORE DETAILS

'Polybush' RED or BLUE 'A' frame bushes
£16.00 pair

CLICK ON THE ABOVE IMAGE FOR MORE DETAILS

Nut & Bolt kit to suit 'A' frame bush change
£9.00

FRONT RED or BLUE Shock absorber 'Polybushes'
from £13.00

REAR RED or BLUE Shock absorber 'Polybushes'
from £18.00

FULL SET RED or BLUE Shock absorber 'Polybushes'
from £30.00

(Shock absorber bushes are not all the same - please state the MANUFACTURER of your shock absorbers when enquiring about bushes)

SHOCK ABSORBERS
HEAVY DUTY GAS ASSISTED

Monroe Gas Adventurer
FRONT £49.00 pair
REAR Split pin rear top fixing (up to 1989)
£49.00 pair
REAR Nyloc nut rear top fixing (1989 onwards)
£49.00 pair

Bilstein Heavy Duty yellow gas assisted
FRONT COIL SPRUNG £89.36 pair
FRONT AIR SPRUNG £118.30 pair

REAR COIL SPRUNG £89.36 pair
REAR AIR SPRUNG £118.30 pair

STEERING DAMPER

Bilstein Heavy Duty Gas Assisted Streering Damper
for all 90/110 & Defender
£42.13

ADDITIONAL ITEMS

Rear 'A' Frame ball joint
(original equipment manufacture)
£17.87

---

BASIC Handling Kit

COIL SPRUNG VEHICLES ONLY

IMPROVE YOUR RANGE ROVER'S HANDLING FROM ONLY £200+ VAT

Kit Contains:

2 Heavy Duty Front Springs 2 Heavy Duty Rear Springs 2 Gas Assisted Front Shock Absorbers (including bushes) 2 Gas Assisted Rear Shock Absorbers (including bushes)

Ride Height Options:

Minus 1 inch - lowers suspension and greatly improves handling. Ideal for vehicles used on-road only. Standard Ride Height - offers improved handling without raising the vehicle's centre of gravity Plus 1 inch - offers increased clearance for the chassis & body while retaining good handling characteristics.

ALL PETROL V8 MODELS: £200+VAT
ALL DIESEL VM/Tdi MODELS: £210 +VAT

We fit our Handling Kits in our workshops. See the Classic Range Rover Workshop section for pricing.

---

ENHANCED Handling Kit

COIL SPRUNG VEHICLES ONLY

Kit Contains:

2 Heavy Duty Front Springs 2 Heavy Duty Rear Springs 2 Heavy Duty Front Shock Absorbers (including bushes) 2 Heavy Duty Rear Shock Absorbers (including bushes) Heavy Duty Steering Damper (including bushes)

Ride Height Options:

Standard Ride Height - offers improved handling without raising the vehicle's centre of gravity Plus 1 inch - offers increased clearance for the chassis & body while retaining good handling characteristics. Minus 1 inch - lowers suspension and greatly improves handling. Ideal for vehicles used on-road only.

ALL PETROL V8 MODELS: £325+VAT
ALL DIESEL VM/Tdi MODELS: £335 +VAT

We fit our Handling Kits in our workshops. See the Classic Range Rover Workshop section for pricing.

---

ULTIMATE Handling Kit

COIL SPRUNG VEHICLES ONLY